电磁复合材料手册(影印版) [Electromagnetic Composites Handbook:Models, Meassurement, and Characterization(Second

电磁复合材料手册(影印版) [Electromagnetic Composites Handbook:Models, Meassurement, and Characterization(Second 下载 mobi epub pdf 电子书 2024


简体网页||繁体网页
里克·摩尔(Rick Moore) 著



点击这里下载
    


想要找书就要到 图书大百科
立刻按 ctrl+D收藏本页
你会得到大惊喜!!

发表于2024-11-10

类似图书 点击查看全场最低价

图书介绍

出版社: 哈尔滨工业大学出版社
ISBN:9787560363547
版次:1
商品编码:12067957
包装:平装
外文名称:Electromagnetic Composites Handbook:Models, Meassurement, and Characterization(Second Edition)
开本:16开
出版时间:2017-03


相关图书





图书描述

内容简介

  《电磁复合材料手册(影印版)》是美国McGraw-Hill Education公司2016年出版的Electromagnetic Composites Handbook Second Edition的影印版。
  《电磁复合材料手册(影印版)》从理论、计算和实验的角度进行材料的表征,涉及非导电介质、半导体材料、导电材料、磁性材料和复合材料等,共提供了300多种材料的相关数据。
  《电磁复合材料手册(影印版)》作者里克·摩尔于1978年获得佐治亚理工学院物理学博士学位。多年来专注于电磁测量和光子结构、纤维材料、复合材料的研究,发表相关科技论文150余篇。

内页插图

目录

Preface
Acknowledgments
Introduction
Outline
References

Chapter 1. Introduction to Wave Equations and Electromagnetic Constitutive Parameters
1.1 Maxwell's Equations and Field Sources
1.2 PermittivityandCharge
1.3 PermeabilityandCurrent
1.4 Wave Equations for Homogeneous and Inhomogeneous Materials
1.5 HomogeneousPropagationinLinearMedia
1.6 Conclusion
References

Chapter 2. Sources and Dispersion for Polarization and PermittMty e(f)
2.1 Sources ofPermittivity, Resistivity, and Conductivityin Materials
2.2 Modeling Material Complex Permittivity and Its Frequency Dependence
2.3 Small Damping
2.4 DC, Zero Frequency, and DC Scaled Permittivity
2.5 Combined Models for Permittivity
2.6 CouplingPermittivityandPermeability
2.7 Additional Bound Charge Contributions to Permittivity and Frequency Dispersion
2.8 PermittMtyVariationwithTemperature
References

Chapter 3. Sources and Dispersion of Magnetization and Permeability μ(f)
3.1 Sources of Permeability
3.2 Frequency Dispersion in Magnetic Materials
3.3 Susceptibility Models for Data Analysis
3.4 An Overview of Micromagnetic Models
3.5 Kramers-Kronig(KK) Relationships
3.6 Temperature-Dependent Permeability
References

Chapter 4. Fundamental Observables for Material Measurement
4.1 Introduction
4.2 Scattering of Plane Waves from Homogeneous Planar Boundaries and Material Slabs
4.3 Single Planar Slab of Material
4.4 Scattering: Cascade Matrix Method for Multi-Boundary MaterialAnalysis
4.5 Scattering from a Shunt Planarlmpedance Sheet
4.6 Transmission and Reflection from Anisotropic Laminates
4.7 A Numerical Anisotropic Material Example
4.8 Conclusion
References

Chapter 5. Composites and Effective Medium Theorles
5.1 Introduction
5.2 EMT Development Timeline
5.3 Limitations and Derivation of EMTs
5.4 Scattering Functions for Spheres
5.5 Scattering and EMT of Large-Aspect Ratio Particle Geometries
5.6 Layered Inclusions
5.7 Model Choices: Importance ofConduction and Particulate Interaction
References

Chapter 6. Conducting-Dielectric and Magneto-Dielectrk Composites
6.1 Introduction
6.2 Percolation, Dimensionality, Depolarization, and Frequency Dispersion in Semiconducting, Conducting-Dielectric Composites
6.3 MagneticEffectiveMedia
References

Chapter 7. Numerical Models of Composites
7.1 Method of Moment Modeling and Laminated Composites
7.2 Fuute Difference Time Domain Simulations
7.3 Comments for Chapters 5 to 7
References

Chapter 8. Electromagnetic Measurement Systems Summary for RF-Mlllimeter Wavelengths
8.1 An Introductionto WidebandMaterial Metrology
8.2 Error Correction,Calibration,and Causality
8.3 Historical: Von Hippel and the Slotted Line
8.4 Summary of Measurement Techniques
8.5 Nonresonant Techniques: GeneralTransmission Line Measurement Guidelines and Procedures
8.6 Cylindrical Waveguide
8.7 Coaxial Lines
8.8 Stripline Measurements
8.9 Focused Beam Free Space System
8.10 Focused Beam Technical Description
8.11 Calibration,Measurements,and Discussion
References

Chapter 9. Resonant Techniques for Material Characterization
9.1 ResonantCavities
9.2 Overview ofthe TEiOp Measurement Technique
9.3 ParallelPlate Stripline (TEM) Cavity
……

Chapter 10. Transmission Line, Free Space Focused Beam and TE10N Measurement Details
Chapter 11. Micrometer and Nanoscale Composites
Chapter 12. Measured Data of Materials and Composites

Index

前言/序言

  Arthur Von Hippel's book, Dielectric Materials and Application, was published in 1954. At the time, the development of composites for electrical and efectromagnetic technologies was just beginning. Thus, dielectric and magnetic theory, models, measurement techniques, and measured data that were presented by Von Hippel emphasized homogeneous isotropic materials composed of a single molecular species or compound. The vast majority of those materials were electrically insulating and nonmagnetic.
  Semiconductor production was in developmental phase, but samples for waveguide measurements (as used by Von Hippel) were not available and the importance ofsemiconductors for everyday technology was not yet recognized. Shockley's patent on the transistor (#2569347) was just 6 years old. Ferrites were known; however, their application in radio and microwave technology for phase shifters, filters, and isolators were just being realized. Ihey are now applied for suppression of radio frequency interference on computer mother boards, integrated circuits, communication networks, and in electrically small antennas. The use of fiber and laminate-based composites in electromagnetic technologies did not begin until the 1970s.
  The Electromagnetic Composites Handbook is designed as an engineering and scientific handbook that extends the Von Hippel text to include data on additional nonconducting dielectrics, semiconducting, conducting, and magnetic materials and composites composed of two or more molecularly distinct compounds that are distributed in size scales from nanometers to centimeter dimensions. The development of models that attempt to predict composite constitutive parameters, using constitutive parameters of their constituents, is a parallel effort. The models support predictions of and comparison to measured permittivity and permeability. Permittivity, permeability, impedance, and conductivity data for solids and composites are presented for frequencies from about 1 MHz to 1000 GHz.
  Chapters of this book are devoted to the descriptions of electromagnetic constitutive parameter
  sources, procedures and equipment to measure the parameters, propagation models in composites, prediction of composite properties, and measured constitutive parameter data for the electromagnetic spectrum of wavelengths larger than a few micrometers but mostly in the meter to millimeter wavelengths. Each chapter concludes with a list of references for that chapter. These are indicated in each chapter's text in brackets. MK units are primarily used throughout this book; however, English or CG units may occasionally enter into discussion. The analysis crosses scientific and technological boundaries and thus the scientific complex operator, i, sometimes appears rather than the engineering j for the complex numbers. Note that in the data tables a positive sign, +, is adopted for dielectric and magnetic loss. Modeling and theory chapters discuss various composite models and then apply the most successful analytical and numerical methodologies to typical electromagnetic design problems that often use electromagnetic composites in their solution, again for wavelengths larger than a few micrometers.
  Reflection and transmission line measurements, such as those of Von Hippel, are the framwork from which composite material measurements began and those measurement techniques are reviewed. The review is followed by a discussion of advances in the measurement technology ince 1980. For example, the microwave and millimeter wave application oflens-based open cavities and free space measurements, common for infrared and optical spectra, is one advance. The techniques include Fabry-Perot and etalon derivatives. The adoption of the infrared and optical techniques for millimeter, centimeter, and even meter wavelengths and the use of various multi-mode resonant cavity configurations, was facilitated by the second major technology addition, i.e., the development of the automatic network analyzer (ANA) and digital receivers-transmitters that had modest power (hundreds of milliwatts), broad bandwidth frequency, synthesized sources, and matched adapters. A third advance was microwave and millimeter antennas with bandwidths larger than 20:1. Advances in electromagnetic tools, instrumentation, and "borrowing of lens-based measurements now allow accurate measurement of isotropic or anisotropic constitutive properties for single samples from a few hundred megahertz to above 100 GHz.
  Some composites may contain constituents that are distributed in size scales of nanometer to centimeter dimensions. The larger scales make the composite electrically inhomogeneous at higher frequencies since inhomogeneity is determined by the ratio of the physical size of the composite phases and the ele 电磁复合材料手册(影印版) [Electromagnetic Composites Handbook:Models, Meassurement, and Characterization(Second 下载 mobi epub pdf txt 电子书 格式

电磁复合材料手册(影印版) [Electromagnetic Composites Handbook:Models, Meassurement, and Characterization(Second mobi 下载 pdf 下载 pub 下载 txt 电子书 下载 2024

电磁复合材料手册(影印版) [Electromagnetic Composites Handbook:Models, Meassurement, and Characterization(Second 下载 mobi pdf epub txt 电子书 格式 2024

电磁复合材料手册(影印版) [Electromagnetic Composites Handbook:Models, Meassurement, and Characterization(Second 下载 mobi epub pdf 电子书
想要找书就要到 图书大百科
立刻按 ctrl+D收藏本页
你会得到大惊喜!!

用户评价

评分

评分

评分

评分

评分

评分

评分

评分

评分

类似图书 点击查看全场最低价

电磁复合材料手册(影印版) [Electromagnetic Composites Handbook:Models, Meassurement, and Characterization(Second mobi epub pdf txt 电子书 格式下载 2024


分享链接








相关图书


本站所有内容均为互联网搜索引擎提供的公开搜索信息,本站不存储任何数据与内容,任何内容与数据均与本站无关,如有需要请联系相关搜索引擎包括但不限于百度google,bing,sogou

友情链接

© 2024 book.teaonline.club All Rights Reserved. 图书大百科 版权所有